August 15, 2022

What are the differences between Curve and Drill and the MultiAxis package?

Curve and Drill is often an introduction to simultaneous 5-axis toolpaths. The product allows you to drill or do a contour in 5-axis. This is often used for trimming applications….

stryve_sarah

August 15, 2022

What are the benefits for an integrated Productivity+ with my CAM Software?

The integrated solution with Mastercam allows you to use probing macros during your machining cycles and create conditions based on your probing….

stryve_sarah

August 15, 2022

What is Port Expert?

Port Expert is a Mastercam add-on dedicated to generating niche toolpath strategies required for cylinder head ports, complex tubes, or even deep pockets….

stryve_sarah

August 15, 2022

What is Blade Expert?

Blade expert is a Mastercam add-on dedicated to generating niche toolpath strategies required for impellers, fans, and propellers….

stryve_sarah

August 15, 2022

What is Mastercam Art?

Art is a Mastercam add-on dedicated to creating organic 3D geometry from 2D sketches, clip art, photos, and CAD files. Afterwards, the customer can apply specialized toolpaths for material removal….

stryve_sarah

August 15, 2022

What if I do not need to generate toolpaths with Mastercam?

If you only need to design 3D parts, or open CAD files for quoting purposes, Mastercam Design is the perfect economical option. All files that are saved in Mastercam Design can be opened by all other core Mastercam products….

stryve_sarah

August 15, 2022

Can I program any 3D or 3-axis toolpaths with Mill?

Yes, you can. In fact, our amazing 3D Optirough (previously only available in Mill 3D) can be used for very quick roughing routines. Our customers also have access to our legacy multi-surface/solid rough pocket and finish parallel toolpaths….

stryve_sarah

August 15, 2022

What’s the difference between Mill and Router?

These products are essentially identical except that Router has additional Saw and Block Drill functions….

stryve_sarah

August 15, 2022

When should customers consider Multiaxis?

Multiaxis can be used to eliminate multiple setups of a single part. This can greatly reduce cycle time, increase accuracy and repeatability, and remove potential user errors within manual setups….

stryve_sarah

August 15, 2022

What are the benefits of adding Mill-Turn product on my Mastercam license?

Mill-Turn product allows you to simplify the programming of Mill-Turn Machines. Benefits of Mastercam Mill-Turn Simulation of the Machine Environment Turret Synchronization Automated Job Set-Up Automated Plane Creation based on Solid Parts Turret Tool Management using 3D Tools User Control on Approach & Retract for Optimized and Safe Transitions Balance and Pinch Turning . . ….

stryve_sarah