Updating to MCfSW 2017 and up – Advanced Option

Follow these steps:

1. Create two empty folders on your desktop. Call one “X9” and the other “2017” or higher (version).
2. Copy only the custom Machine and Control Definitions from the “C:\Users\Public\Public Documents\shared mcamforswx9\CNC_MACHINES” folder to the X9 folder created on the desktop.

The Machine Definitions will have one of the following file extensions:

  • .MMD-9 for mill
  • .LMD-9 for lathe
  • .RMD-9 for router
  • .WMD-9 for wire

(If you can’t see the file extensions, go to the end of this document for instructions on how to make them visible).

The Control Definitions will have the following extension:

  • .CONTROL-9

3. Copy just the custom post processors from the “C:\Users\Public\Public Documents\shared mcamforswx9\Machine Type\Posts” folder to the X9 folder on the desktop. The post processors will have a .pst, .psb and/or .psm extension.

Note: Machine Type could be mill, lathe, wire and/or router.
4. If you have a custom tool library, copy it to the X9 folder on the desktop from “C:\Users\Public\Public Documents\shared mcamforswx9\Machine Type\Tools”.
5. Open SolidWorks.

6. Select the Mastercam (Version) tab.

7. Select Toolpath Utilities.

8. Select Migration Wizard.

9. Select Advanced.

10. Set Source to the created X9 folder and Destination to the created (version) folder.

11. Next > Next > Next > Finish.
12. Place updated files in respective (Version) folders.
Note: Operation libraries and operation defaults can be updated as well if needed. However, do not update configuration file. The configuration file needs to be rebuilt within (version). Keep in mind for this that both versions can be opened at the same time.


Troubleshooting

Issue: Unable to see file extensions.
1. Go to Windows Start menu.

2. Search “folder options”.

3. Go to View tab.

4. Uncheck Hide extensions for known file types.