Tag Archives: Post processors
Mastercam Mill-Turn Posts are Critical

Mill-Turn Part 2: Posts Are Critical

Getting in Sync with Mill-Turn A CAD/CAM approach for making the most out of your multistream manufacturing investments Part 2 of 4: Posts Are Critical Post processors are the heart and soul of CAM. So it is very important to make sure the post is set up correctly and in tune with your particular machine […]

Post Install Instructions

Post Install Instructions – Mastercam

Post Install Instructions for Mastercam Note: At any point that (version) is present, enter/insert/reference the version of Mastercam in question. ie. A path states as ‘C:\Program Files\mcam(version)\common’ Save the zip file containing the post from your email to an appropriate place such as the desktop. Extract the files from the zip file to a folder. This will create […]

Reloading Machine

Reloading Machine

Reloading Machine   In the “Operations Manager”, click the “+” beside “Properties” and then click “Files”.       In the “Machine Group Properties” window, click “Replace”.     Select the machine definition file even if it is selected already.     This  will  load  the  new  machine  definition  and  control  definition  settings  into  your […]

Install Machine Files

Install Machine Files

X9 Mastercam Post Install Instructions   Post install instructions for X9 1. Save the zip file containing the post from your email to an appropriate place such as the desktop. 2. Extract the files from the zip file to a folder this will create a folder with the files. 3. Start Mastercam. 4. Go to […]

Discover Mastercam with a customized Demo